Sony VPL-HS2 15 GB, 7 Turn the FOCUS ring to adjust the focus again, When projecting from the center, 1Set “V Keystone” in the INSTALL SETTING

When projecting using “Side Shot” adjustment only

1Set “V Keystone” in the INSTALL SETTINGto “Manual,” and set the level to “0” ( 1 page 27) or press RESET.

2Adjust so that the left or right side of the picture fits that of the screen.

If you position the projector on the left side of the screen, adjust so that the left side of the picture fits the left side of the screen. With the projector positioned on the right side, adjust so that the right side fits the right side of the screen.

At the same time, adjust the vertical size of the aligned side of the picture to fit the screen using the ZOOM ring.

Screen

Picture

3Adjust to correct horizontal trapezoidal distortion using the SIDE SHOT + or – button.

For how to correct, see step 3 in “When projecting using both “Side Shot” and “V Keystone” adjustments.”

When projecting from the center

Adjust so that both the position and size of the bottom side of the picture fit those of the bottom side of the screen using the adjuster and the ZOOM ring.

If you set “V Keystone” in the INSTALL SETTING menu to “Auto” (1 page 27), the vertical distortion will be automatically corrected.

Screen

Picture

Note

The V Keystone adjustment may not correct trapezoidal distortion perfectly, depending on the room temperature or the screen angle. In this case, adjust the distortion manually.

7 Turn the FOCUS ring to adjust the focus again.

Tip

When you adjust distortion manually using “V Keystone” and the SIDE SHOT buttons in steps 6 and 7, the built-in test pattern is projected on the screen. If you want to make adjustments using the current input signal, set “Test

Pattern” in the INSTALL SETTING menu to “Off.” (1 page 27)

and Connections Preparations

Step 3: Adjusting the Picture Size and Position 15 GB