Indicators

The LAMP/COVER or TEMP/FAN indicator on the control panel lights up or flashes if there is any trouble with your projector.

LAMP/COVER Indicator

TEMP/FAN Indicator

LAMP/

TEMP/

POWER

ON/

COVER

FAN

SAVING

STANDBY

LAMP/COVER

c Attach the lamp cover or the air filter

flashes.

cover securely. (1 pages 31 and 32)

 

 

LAMP/COVER

c The lamp has reached the end of its

lights up.

life. Replace the lamp. (1 page 31)

 

c The lamp becomes a high temperature.

 

Wait for one minute to cool down the

 

lamp and turn on the power again. (1

 

page 20)

 

 

TEMP/FAN

c The fan is broken. Consult with

flashes.

qualified Sony personnel.

 

 

TEMP/FAN

c The internal temperature is unusually

lights up.

high. Check to see if nothing is

 

blocking the ventilation holes.

 

 

LAMP/COVER

c The electrical system breaks down.

and TEMP/FAN

Consult with qualified Sony

light up.

personnel.

 

 

Others

Warning Messages

Use the list below to check the meaning of the messages displayed on the screen.

High temp.!

c Turn off the power.

Lamp off in 1

c Check to see if nothing is blocking the

min.

ventilation holes.

 

 

Frequency is

c Input a signal that is within the

out of range!

acceptable range of the frequency.

 

c Set the output signal on an external

 

monitor of the connected computer to

 

SVGA.

 

 

 

Please check

c Set “Input-A Signal Sel.” in the SET

Input-A Signal

SETTING

menu to “Computer”

Sel.

when RGB signal is input from the

 

computer. (1 page 27)

 

 

Please replace

c It is time to replace the lamp. Replace

the LAMP.

the lamp. (1 page 31)

 

 

Please replace

c It is time to replace the air filter. Replace

the filter.

the air filter. (1 page 32)

 

 

 

Caution Messages

Use the list below to check the meaning of the messages displayed on the screen.

NO INPUT c No signal is input. Check connections. (1 page 10)

Not applicable! c Press the appropriate button.

GB 30 Troubleshooting