andConnections Preparations

4 Turn the Conversion Lens clockwise.

 

Notes on installation of the optional Conversion Lens

•The Lens scratches easily, so when handling it, always place it gently on a stable and level surface in a horizontal position.

•Be sure not to bump the Lens on the surface of the lens of the projector.

•Avoid touching the Lens surface.

To remove the installed Conversion Lens

Installing the Projector and a Screen

The installation distance between the projector and screen varies depending on the size of the screen.

1 Determine the installation position of the projector and screen.

Screen

Turn the installed Lens counterclockwise until it can be removed.

d

12˚ f e

7˚

a

b

Projector

Notes

•Be sure not to drop the uninstalled Conversion Lens.

•When you adjust picture distortion using “V Keystone” or “Side Shot” in the INSTALL SETTING menu with the optional Conversion Lens attached to the projector, the aspect ratio of the original picture may not be correctly displayed.

a:Minimum projection distance between the screen and the center of the projector’s lens when you place the projector on the side (“Side Shot”), or when you place the projector with the center of the screen and the center of the lens aligned.

b:Maximum projection distance between the screen and the center of the projector’s lens when you place the projector on the side, or when you place the projector with the center of the screen and the center of the lens aligned.

c:Maximum horizontal distance between the right/left end of the screen and the center of the projector’s lens when the projector is placed on the side (when you use projection distance a)

d:Maximum horizontal distance between the right/left end of the screen and the center of the lens when the projector is placed on the side (when you use projection distance b)

e:Maximum vertical distance from the bottom of the screen to the center of the projector’s lens when you place the projector on the side (when you use projection distance a)

GB 8

Step 1: Installing the Projector