Location and Function of Controls
ON/STANDBY: Lights up or flashes under the following conditions:
•Lights up in red when the AC power cord is plugged into the wall outlet. Once in the standby mode, you can turn on the projector with the I / 1 key.
Note
The
•Lights up in green when the power is turned on.
•Flashes in green while the cooling fan runs after the power is turned off with the I / 1 key. The fan runs for about 90 seconds after turning off the power.
The ON/STANDBY indicator flashes quickly for the first 60 seconds of that time.
During this first 60 seconds, you cannot turn the power back on with the I / 1 key.
For details on the LAMP/COVER and the TEMP/FAN indicators, see page 35 (GB).
Connector Panel
Left side
PUSH
| 4 | 5 | 6 |
|
AUDIO | MONITOR | AUDIO | S VIDEO | |
| OUTPUT | REMOTE | VIDEO IN VIDEO | |
|
|
| ~ |
|
|
|
| AC IN |
|
AUDIO | INPUT B RGB | USB AUDIO INPUT A | RGB |
|
3 2 1
1AC IN socket
Connects the supplied AC power cord.
2INPUT A connectors
Connect to external equipment such as a computer.
RGB connector (HD
When inputting a component or 15k RGB signal, use the appropriate cable.
For details, see “To connect 15k RGB/Component equipment” on page 17 (GB).
AUDIO jack (stereo minijack): Connects to the
audio output of the computer.
USB connector (USB
Connects to a computer. When you connect the projector to the computer via this connector, the projector recognizes that a USB mouse is connected and you can control the mouse function of the computer connected to the INPUT A connector using the supplied Remote Commander. The supplied application software can be used on the computer connected to this connector.
12 (GB)