5 Press the M or m key to select LANGUAGE, then press the , or ENTER key.
6 Press the M or m key to select a language, then press the < or ENTER key.
The menu changes to the selected language.
To clear the menu display
Press the MENU key.
The menu display disappears automatically if no key is pressed for one minute.
Projecting
Selecting the Menu Language / Projecting
1 After all equipment is connected completely, plug the AC power cord into the wall outlet.
The ON/STANDBY indicator lights in red and the projector goes into the standby mode.
2 Press the I / 1 key to turn on the projector. The ON/STANDBY indicator lights in green.
3 Turn on all equipment connected to the projector. Press the INPUT key to select the input source.
APA key | ON/STANDBY | 3 | |||
indicator |
| ||||
| LAMP/ TEMP/ | POWER | ON/ |
| |
| COVER | FAN | SAVING STANDBY | ||
| HELP |
| MENU |
| |
VOLUME | APA RESET |
| ENTER | INPUT | |
|
|
|
FREEZE MS SLIDE I / 1
D KEYSTONE
INPUTAPA
MENU PIC ENTER
MUTING
+RESET
R
–CLICK
D ZOOM
1 FUNCTION 2
2
Rear remote control detector
2
3
APA key
VIDEO: Selects the video signal input from a VCR connected to the VIDEO jack on the VIDEO IN connectors.
Depending on the type of computer you have, for example a notebook, or an
keys (e.g., , etc.), or by changing your computer’s settings.
F7 or Fx
Fn
4 Turn the zoom ring to adjust the size of the picture.
5 Turn the focus ring to adjust the focus.
Note
Looking into the lens when the projector is projecting an image may cause injury to your eyes.
PROJECTOR
To cut off the picturePress the PIC MUTING key on the Remote
Commander. To restore the picture, press the PIC
MUTING key again.
19 (GB)