STATUS (on-screen display)

Sets up the on-screen display.

ON: Shows all of the on-screen display.

OFF: Turns off the on-screen display except for the menus, a message when turning off the power, and warning messages.

For details on the warning messages, see page 35 (GB).

The SET SETTING Menu / The INSTALL SETTING Menu

IR RECEIVER

Selects the remote control detectors on the front and rear of the projector.

FRONT & REAR: Activates both the front and rear detectors.

FRONT: Activates the front detector only.

REAR: Activates the rear detector only.

INPUT-A

Selects the computer, component or video GBR (15k RGB) signal input from the INPUT A connector.

Note

If the setting is not correct, “Please check INPUT-A setting.” appears on the screen and the color of the picture becomes strange or the picture is not displayed.

AUTO INPUT SEL

When set to ON, the projector detects input signals in the following order: INPUT-A/INPUT-B/VIDEO/S- VIDEO. It indicates the input channel when the power is turned on or the INPUT key is pressed.

LANGUAGE

Selects the language used in the menu and on-screen displays.

Available languages are: English, French, German, Italian, Spanish, Japanese, Chinese, Portuguese and Korean.

SPEAKER

Set to OFF to cut off the sound of the internal speakers. When set to OFF, “SPEAKER OFF” appears on the screen when you turn on the power.

POWER SAVING

When set to ON, the projector goes into the power saving mode if no signal is input for 10 minutes.

The INSTALL SETTING Menu

The INSTALL SETTING menu is used for changing the install settings of the projector.

INSTALL SETTING

INPUT-A

 

KEYSTONE MEM: ON

DIGIT KEYSTONE: 0

INSTALLATION: CEILING-FRONT

MENU POSITION: CENTER

MENU COLOR: STANDARD

MENU BACKGRND: STANDARD

LAMP TIMER: 234H

Operation

1. Select an item

Use the M or m key to select the item, then press the

,or ENTER key.

2.Adjust an item

•When changing the adjustment level:

To increase the value, press the M or , key. To decrease the value, press the m or < key. Press the ENTER key to restore the original screen.

•When changing the setting:

Press the M or m key to change the setting.

Press the ENTER or < key to restore the original screen.

27 (GB)