Sony VPL-PX11 Preset signals

The INPUT SETTING Menu / The SET SETTING Menu

Preset signals

Memory	Preset signal		fH	fV	Sync	SIZE
No.			(kHz)	(Hz)		H
1	Video 60 Hz		15.734	59.940	H-neg V-neg
2	Video 50 Hz		15.625	50.000	H-neg V-neg
3	480/60i		15.734	59.940	S on G/Y or
4	575/50i		15.625	50.000	Composite sync
6	640 ⋅ 350	VGA mode 1	31.469	70.086	H-pos V-neg	800
7		VGA VESA1) 85 Hz	37.861	85.080	H-pos V-neg	832
8	640 ⋅ 400	PC-98012)Normal	24.823	56.416	H-neg V-neg	848
9		VGA mode 2	31.469	70.086	H-neg V-pos	800
10		VGA VESA 85 Hz	37.861	85.080	H-neg V-pos	832
11	640 ⋅ 480	VGA mode 3	31.469	59.940	H-neg V-neg	800
12		Macintosh 13”	35.000	66.667	H-neg V-neg	864
13		VGA VESA 72 Hz	37.861	72.809	H-neg V-neg	832
14		VGA VESA 75 Hz	37.500	75.000	H-neg V-neg	840
15		VGA VESA 85 Hz	43.269	85.008	H-neg V-neg	832
16	800 ⋅ 600	SVGA VESA 56 Hz	35.156	56.250	H-pos V-pos	1024
17		SVGA VESA 60 Hz	37.879	60.317	H-pos V-pos	1056
18		SVGA VESA 72 Hz	48.077	72.188	H-pos V-pos	1040
19		SVGA VESA 75 Hz	46.875	75.000	H-pos V-pos	1056
20		SVGA VESA 85 Hz	53.674	85.061	H-pos V-pos	1048
21	832 ⋅ 624	Macintosh 16”	49.724	74.550	H-neg V-neg	1152
22	1024 ⋅ 768	XGA VESA 43 Hz	35.524	86.9583)	H-pos V-pos	1264
23		XGA VESA 60 Hz	48.363	60.004	H-neg V-neg	1344
24		XGA VESA 70 Hz	56.476	69.955	H-neg V-neg	1328
25		XGA VESA 75 Hz	60.023	75.029	H-pos V-pos	1312
26		XGA VESA 85 Hz	68.677	84.997	H-pos V-pos	1376
27	1152 ⋅ 864	SXGA VESA 70 Hz	63.995	70.016	H-pos V-pos	1472
28		SXGA VESA 75 Hz	67.500	75.000	H-pos V-pos	1600
29		SXGA VESA 85 Hz	77.487	85.057	H-pos V-pos	1568
30	1152 ⋅ 900	Sunmicro LO	61.795	65.960	H-neg V-neg	1504
31		Sunmicro HI	71.713	76.047	Composite sync	1472
32	1280 ⋅ 960	SXGA VESA 60 Hz	60.000	60.000	H-pos V-pos	1800
33		SXGA VESA 75 Hz	75.000	75.000	H-pos V-pos	1728
34	1280 ⋅ 1024	SXGA VESA 43 Hz	46.433	86.8723)	H-pos V-pos	1696
35		SGI-5	53.316	50.062	S on G	1680
36		SXGA VESA 60 Hz	63.974	60.013	H-pos V-pos	1696
37		SXGA VESA 75 Hz	79.976	75.025	H-pos V-pos	1688
38		SXGA VESA 85 Hz	91.146	85.024	H-pos V-pos	1530

1)VESA is a registered trademark of the Video Electronics Standards Association.

2)PC-98 is a registered trademark of NEC Corporation.

3)The data preset in memory numbers 22 and 34 are the interlace signals.

4)Set the resolution and the frequency of the signal of a computer connected to the projector within the limits of the preset signal values.

Since the data is recalled from the preset memory for the following signals, you can use this preset data by adjusting SIZE H. Make finer adjustments using

SHIFT.

Signal	Memory No.	SIZE H
Super Mac-2	23	1312
SGI-1	23	1320
Macintosh 19”	25	1328
Macintosh 21”	27	1456
Sony News	36	1708
PC-9821	36	1600
1280 ⋅ 1024
WS Sunmicro	37	1664

Note

When the aspect ratio of an input signal is other than 4:3, a part of the screen is displayed in black.

The SET SETTING Menu

The SET SETTING menu is used for changing the settings of the projector.

SET SETTING	INPUT-A
STATUS:	ON
INPUT-A:	COMPUTER
AUTO INPUT SEL: OFF
LANGUAGE: ENGLISH
SPEAKER:	ON
POWER SAVING:	OFF
IR RECEIVER:	FRONT&REAR

Operation

1. Select an item

Use the M or m key to select the item, then press the

,or ENTER key.

2. Change the setting

Press the M or m key to change the setting.

To restore the original screen, press the ENTER or < key.

26 (GB)