Turn off the power and unplug the power cord.

Notes

•Be sure to use an LMP-P202 Projector Lamp for replacement. If you use lamps other than the LMP- P202, the projector may malfunction.

•Be sure to turn off the projector and unplug the power cord before replacing the lamp.

•Do not put your hands into the lamp replacement socket, and do not allow any liquid or objects to fall into it to avoid electrical shock or fire.

Disposal of a used projector lamp

As the materials used in this lamp are similar to those of a fluorescent lamp, you should dispose of a used projector lamp in the same way as a fluorescent lamp.

Cleaning the Air Filter

The air filter should be cleaned every 300 hours.

When it becomes difficult to remove the dust from the filter, replace the filter with a new one.

To clean the air filter, follow the steps below:

1

2 Remove the air filter cover at the bottom of the projector.

3 Remove the air filter.

4 Wash the air filter with a mild detergent solution and dry it in a shaded place.

Maintenance

5 Hook the air filter on the holders of the air filter cover, then set the filter and replace the cover.

Notes

•If the dust cannot be removed from the air filter, replace the air filter with the supplied new one.

•Be sure to attach the air filter cover firmly; the power cannot be turned on if it is not closed securely.

•Place the air filter so that it fits in a notch on the air filter cover.

To clean the ventilation holes

When you clean the air filter, clean the ventilation holes (intake, rear and bottom) also. Remove the dust from the outside of the ventilation holes with a vacuum cleaner.

Maintenance

33 (GB)