Push to Talk (PTT)

PTT calls

To make a PTT call

1Press to access the PTT contacts list.

3When the phone is in silent mode, the caller’s information appears. A vibrating alert replaces the tone. You must manually accept the PTT call when the phone is in silent mode.

If the clamshell is closed, the Contacts screen appears

 

Answer – transfers the caller’s voice to the

on the external display. Use the volume keys to scroll

 

 

ear speaker.

 

through the list.

 

Busy – ends the call. PTT calls are not

2 Select the contact or group you want to call.

 

 

forwarded to voicemail.

Make sure the contact/group shows Available

To end a PTT call

 

( /

) or Silent/Vibrate ( / ).

 

3 Press

to activate the call. After the tone

Either wait for the call to time out from inactivity

sounds you have the floor and may begin

or press End Call.

 

speaking.

To make a Quick Group Call

4 Hold the PTT key down while speaking.

 

Make a PTT group call without previously

Release it when you are not.

 

creating a PTT group.

 

5 To end the PTT session, turn off the speaker

 

1

}

to access your contact list.

and close the phone or press More } End Call.

2 Highlight the first member of the Quick Group.

You will be automatically disconnected if there

is no activity for 30 seconds.

3 Press Mark to select group members from

To receive a PTT call

4

the list.

 

Press Continue.

 

1 For the best results, set your ringer to the highest

 

5

Press and hold

to call.

volume setting.

2

If your status is available, a tone signals an

• Leave a voicemail for the Quick Group.

• Save the Quick Group.

 

incoming PTT call. The caller’s information

 

 

appears on the screen and you automatically hear the caller’s voice.

38

This is the Internet version of the user's guide. © Print only for private use.

Page 39
Image 39
Sony Ericsson Z525a manual PTT calls, To make a PTT call, To make a Quick Group Call, To receive a PTT call