For Machines Mfg. Since 7/09

O P E R A T I O N

EVS Toolroom Lathes

Installing and Adjusting Camlock Studs

When fitting a chuck or faceplate with camlock studs, or when mounting a new chuck or faceplate, it may be necessary to install or adjust the camlock studs.

Tool Needed

Qty

Hex Wrench 6mm

................................................. 1

To install or adjust camlock studs onto a chuck or faceplate:

1.Lay the chuck or faceplate upside down on a protective, flat surface.

2.If installed, remove the locking cap screw adjacent to each of the six cam-lock mounting holes (see Figure 44).

Cam-Lock

Stud

Locking

Cap

Screw

Figure 44. Identifying chuck camlock studs and

locking cap screws.

3.Thread each cam-lock stud into the chuck or faceplate until the depth mark shown in Figure 45 is even with the surface of the chuck or faceplate and the curved indent on the side of the stud faces the locking cap screw hole, as shown in Figure 46. This is an initial adjustment.

Depth Mark

Figure 45. Example of camlock stud depth mark.

Camlock Stud Depth

Mark is Even with ChuckChuck/Faceplate or Faceplate Surface

Camlock Stud

Locking Cap

Screw Hole

Figure 46. Initial adjustment of camlock stud.

4.Install and tighten the locking cap screws.

5.Make sure that the cam-lock studs can rotate back and forth against the head of the locking cap screw (see Figure 47).

Camlock Stud Can

Chuck/Faceplate

Rotate Back/Forth

 

Slightly

 

Cap Screw

Installed & Tight

Figure 47. Camlock stud and cap screw correctly

installed.

6.Insert the chuck onto the spindle, then check the position of each camlock, making sure the cam line points between the "V" marks.

If one or more of the cams do not point between the "V" marks on the chuck, remove the chuck, and fine tune the camlock stud adjustment by adjusting the stud in or out and using Figure 48 on the following page as a guide to correctly position the cam lines.

-29-

Page 31
Image 31
Southbend SB1012 owner manual Installing and Adjusting Camlock Studs, Tool Needed Qty

SB1012 specifications

The Southbend SB1012 is a versatile and efficient commercial range designed specifically for the rigorous demands of professional kitchens. This powerful cooking appliance features a robust construction and advanced technologies that cater to chefs who require precision and reliability in their culinary endeavors.

One of the standout features of the SB1012 is its powerful burners, which come equipped with heavy-duty cast-iron grates. The range typically includes four open burners that deliver exceptional heat output. This allows chefs to achieve quick boiling, searing, and simmering, thereby ensuring perfect cooking results every time. The burners are designed to provide consistent heat distribution, reducing the chance of hot spots and uneven cooking.

The Southbend SB1012 also incorporates a 12-inch griddle, adding another layer of versatility to its functionality. The griddle is constructed from high-quality materials that provide even heat and withstand high temperatures, making it suitable for cooking everything from pancakes to stir-fried dishes. The grease trough and easy-to-clean design contribute to the overall efficiency of the kitchen.

In addition to its cooking surfaces, the SB1012 features a spacious oven compartment, designed to accommodate larger pans and dishes. With a temperature range that typically goes up to 500 degrees Fahrenheit, the oven is ideal for baking, roasting, and other cooking techniques that require precise temperature control. The inclusion of a built-in temperature gauge helps chefs monitor cooking conditions at a glance.

Durability is a hallmark of the Southbend SB1012. The range is constructed from heavy-duty stainless steel, which not only enhances its aesthetic appeal but also ensures resistance to wear and tear in a busy kitchen environment. The removable ovens and easy-access components facilitate straightforward cleaning and maintenance, ensuring the equipment remains in peak condition even after extensive use.

To further improve user experience, the Southbend SB1012 is designed with safety features in mind. The range often includes pilot lights for easy ignition, and the heavy-duty construction minimizes the risk of accidental damage.

In summary, the Southbend SB1012 combines powerful cooking performance with durable construction and ease of use, making it a preferred choice for professional kitchens looking to optimize their cooking capabilities. Its advanced features, versatility, and reliability are tailored to meet the high standards of culinary professionals.