For Machines Mfg. Since 7/09

M A I N T E N A N C E

EVS Toolroom Lathes

Cleaning Pump System & Changing Oil

The headstock oil pump system must be cleaned and the oil changed after the break-in period and then annually (or every six months with hard service or extreme working conditions).

To clean the oil pump system:

1.DISCONNECT LATHE FROM POWER!

2.Remove the cap from the fill spout shown in Figure 110.

Fill Spout

Access Cover

Drain Plug

Figure 110. Headstock oil tank component locations.

3.Place at least a 3-gallon drain pan under the tank and remove the drain plug to empty the oil into the pan.

4.Clean away any dust, debris, metal shavings, or grime from the access cover.

5.Using a 4mm hex wrench, remove the four access cover cap screws, then use the cap screw in the center as a handle and lift off the access cover.

6.Put on splash-proof safety glasses, rubber gloves, and a respirator rated for fumes.

7.Using mineral spirits and rags, wipe down the inside of the tank to clean it. Make sure to soak up any excess mineral spirits with a dry rag, so it does not stay in the tank.

8.After the tank is completely cleaned out, unthread the screen from the bottom of the pump suction pipe (see Figure 111), and remove the screen from the tank.

Suction

Screen

Figure 111. Suction screen removal.

9.Clean the suction screen thoroughly with mineral spirits and compressed air.

10.Re-install the suction screen.

Tip: Consider placing one or two magnets at the bottom of the tank to collect any fine metal particles generated by the headstock drive train. This will make cleaning easier the next time around and ensure that more metal particles are kept out of the headstock oil.

11.Re-install the drain plug.

12.Refill the tank with oil (refer to Page 56 for the recommended type and amount of oil to use).

13.Replace the fill spout plug.

-57-

Page 59
Image 59
Southbend SB1012 owner manual Cleaning Pump System & Changing Oil, To clean the oil pump system

SB1012 specifications

The Southbend SB1012 is a versatile and efficient commercial range designed specifically for the rigorous demands of professional kitchens. This powerful cooking appliance features a robust construction and advanced technologies that cater to chefs who require precision and reliability in their culinary endeavors.

One of the standout features of the SB1012 is its powerful burners, which come equipped with heavy-duty cast-iron grates. The range typically includes four open burners that deliver exceptional heat output. This allows chefs to achieve quick boiling, searing, and simmering, thereby ensuring perfect cooking results every time. The burners are designed to provide consistent heat distribution, reducing the chance of hot spots and uneven cooking.

The Southbend SB1012 also incorporates a 12-inch griddle, adding another layer of versatility to its functionality. The griddle is constructed from high-quality materials that provide even heat and withstand high temperatures, making it suitable for cooking everything from pancakes to stir-fried dishes. The grease trough and easy-to-clean design contribute to the overall efficiency of the kitchen.

In addition to its cooking surfaces, the SB1012 features a spacious oven compartment, designed to accommodate larger pans and dishes. With a temperature range that typically goes up to 500 degrees Fahrenheit, the oven is ideal for baking, roasting, and other cooking techniques that require precise temperature control. The inclusion of a built-in temperature gauge helps chefs monitor cooking conditions at a glance.

Durability is a hallmark of the Southbend SB1012. The range is constructed from heavy-duty stainless steel, which not only enhances its aesthetic appeal but also ensures resistance to wear and tear in a busy kitchen environment. The removable ovens and easy-access components facilitate straightforward cleaning and maintenance, ensuring the equipment remains in peak condition even after extensive use.

To further improve user experience, the Southbend SB1012 is designed with safety features in mind. The range often includes pilot lights for easy ignition, and the heavy-duty construction minimizes the risk of accidental damage.

In summary, the Southbend SB1012 combines powerful cooking performance with durable construction and ease of use, making it a preferred choice for professional kitchens looking to optimize their cooking capabilities. Its advanced features, versatility, and reliability are tailored to meet the high standards of culinary professionals.