SOYO SY-7VCA Wake Up, Setting, Description, Events, PowerOn by, PCI Card, Modem Ring, Resume

BIOS Setup Utility		SY-7VCA
Wake Up	Setting	Description	Note
Events
PowerOn by
	Disabled	If enabled any PCI interrupt will
PCI Card	Enabled	wake up the system.	Default
Modem Ring
	Disabled	An input signal on the serial Ring
Resume	Enabled	Indicator (RI) line (in other words,	Default
		an incoming call on the modem)
		awakens the system from a soft off
		state.

Resume by Alarm

Disabled	The system ignores the alarm.	Default
Enabled	Set alarm to power on the system by
	the date (1-31) or time (hh:mm:ss).
	If the date is set to [0], the system

will self-power on by alarm everyday at the set time.

Primary INTR

IRQs Activity

Monitoring

(Press Enter)

ON	When set to On, any event occurring	Default
	at will awaken a system which has
	been powered down.
OFF
Primary	IRQ3(COM2), IRQ4(COM1),
	IRQ5(LPT2), IRQ6(Floppy Disk),
	IRQ7(LPT1), IRQ12(PS/2 mouse),
	IRQ13(Coprocessor),
	IRQ14(HardDsik)
Secondary	IRQ9(IRQ2 Redir),
	IRQ10( Reserved),
	IRQ11(Reserved)
Disabled	IRQ8 (RTC Alarm), IRQ15
	(Reserved)

81