Speco Technologies DVR-16/IP user manual Record, Camera Detect, Camera Title

Situation 1: No alarm event happens.

Channel 1 PPS = 30 *			4	= 6.31
		4	+ 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1
Channel 2 PPS = 30 *			1	= 1.58
		4	+ 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1
Channel 3 PPS = 30	*		1	= 1.58
		4	+ 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1
Situation 2: An alarm event happens on channel 2.
Channel 1 PPS = 30	*		4	= 4.61
		4	+ 8 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1
Channel 2 PPS = 30	*		8	= 9.23
		4	+ 8 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1
Channel 3 PPS = 30	*		1	= 1.15
		4	+ 8 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1

6.4.2 Camera Detect

The DVR-16/IP can check the camera BNC connectors for video signal and judge the channel is connected or not. If the camera doesn’t exist, it’s recommended to set that channel as “not installed”. Otherwise that channel will be considered as “video loss”. Besides, the DVR-16/IP storage space is wasted.

6.4.3 Camera Title

Each camera can be assigned a “Title” (up to 12 characters). The default title for each camera is the channel number.

Use the right and left direction buttons to select the wanted camera, and then press Enter to enter a virtual table (shown as right figure).

Camera_1

! ” # $ % & ( ) * + , _ . / 0 1 2 3 4 5 6 7 8 9 : : < > ?

@A B C D E F G H I J K L M N O P Q R S T U V W X Y Z [ \ ] ^ _

‘ a b c d e f g h i j k l m	n o
p q r s t u v w x y z {	} ~

You can use DIRECTION buttons to select wanted character, and press ENTER to add the character to the title. You can also press MODE button to correct the wrong character you enter by mistake. Press MODE button, and a cursor will appear over the title. Press MODE button repeatedly till the cursor over the character need to be changed; now you can pick another character to replace it by using the DIRECTION buttons. The first character (blank) is used as Space button.

6.5 Record

This menu allows you to set up all the parameters related to recording, ex. REC Quality, PPS (Picture Per Second)…

Once you change these parameters, the total record time will be changed as well. The table below is offered for your reference (the PPS is set to 60).

	Record
1	Day / Night
2 Weekend
3 REC Event Only		OFF
4	REC Priority Mode
5	Circular Record	OFF
6	HDD Full Alarm Out	ON
7	Exit

19