Appendix 4: Super MMX & Super MPX System Setup
1. MMX (Multiplexer-Matrix)
Purpose: by using the call monitor output of the
Ex: when users want to view camera 32, in keyboard’s speed dome mode, press camera number 32, then Enter, the system monitor will show the video from camera 32. If camera 32 happens to be a dome camera, he may use the joystick to control it immediately.
System diagram:
Notice:
(1)All
(2)All
(3)Choose “Super MMX” from “System Monitor Setting” in keyboard’s “System Setting”
(4)All devices must be connected to the same RS485 bus. In security system, the Dome Cameras are mapping to each channel of the
(5)The ID of
43
