Speco Technologies DVR-16/IP user manual Save/ Load Default, CD-RW Copy, Engineer Set Up

6.8 Save/ Load Default

This menu allows you to restore the DVR-16/IP to the default configuration, which was done by the installer (engineer), or the factory setting.

6.8.1 Load Installer Setting

This item allows you to recall the “Installer’s Configuration” from the on-board non-volatile memory.

6.8.2 Save Installer Setting

Save/ Load Default

1 Load Installer Setting

2 Save Installer Setting

3 Load Factory Setting

4 Load Factory Password

5 Exit

Load Installer Setting

1 Save/ Load: No

2 Save/ Load: Yes

3 Exit

This item allows you to save the current setting as “Installer’s setting”. This operation can only be executed with engineer password; otherwise, “Illegal Operation” message will be displayed.

6.8.3 Load Factory Setting

This item allows you to recall the “Factory’s Default” from the read only memory.

6.8.4 Load Factory Password

This item allows you to reload the factory password in case you forget your own password. The initial factory password is 9999.

6.9 CD-RW Copy

This sub-menu allows you to export video to CD-RW. Select the start time and end time of desired video and then press ENTER on 13 Copy to start copying.

Press the 6th item to play the CD.

6.10 Engineer Set Up

If you enter the main menu with engineer’s password, you can enter this menu.

6.10.1 Change Password

		CD-RW Copy
1	B_Year	8 E_Year
2	B-Month	9 E_ Month
3 B-Day		10 E_Day
4	B_Hour	11 E_Hour
5	B_Min	12 E_Min
6 Play CD		13 Copy
7	Stop	14 Exit

	Engineer Set Up
1	Change Password	9999
2	Covert Cam Visible	Yes
3	Playback Check	OFF
4	Language	English
5	Format Hard Disk
6	Exit

This password can be changed to any four-digit number use right/ left buttons to change to a new number, press ESC button when finished, the password will be saved into non-volatile memory. If the user forgets this new password, he can recall the factory password by using Load Factory Password in Save Load Option sub-menu.

27