Settings
To set your phone’s TTY mode from your TTY device, issue one of the following commands while on an active call:
•“VCO please” — to select VCO mode.
•“HCO please” — to select HCO mode.
•“HCO off please” — to turn off HCO mode.
!
W A R N I N G
When you are using HCO, the sound coming from your phone speaker may be uncomfortably loud. Use caution when putting the phone to your ear. (For information on setting your phone’s speaker volume, see “VoiceVolume” on page 170.)
NOTE:TTY device manufacturer’s proprietary feature such as Turbo- Code,
Setting TTY Baud Rate
By default, your phone’s TTY baud rate is set to 45.45, the baud rate required for TTY calls within the US. To make calls outside the US, set your TTY baud rate to 50.0.
To change the TTY baud rate:
1From the Initial Setup screen, press R to scroll to TTY Baud.
2Press C under CHANGE.
3Press S to scroll to the baud rate for your location.
4Press C under SELECT.