Sprint Nextel SCP-3100 manual Setting Up Screen Call, Activating Screen Call, Toeraseallvoicememos

Toeraseallvoicememos:

▶Select >Tools>VoiceServices>VoiceMemo>

EraseAll>Yes.

– or –

Press , then select EraseAll>Yes.

Setting Up Screen Call

This feature enables you to screen incoming calls by using a recorded announcement, either one that is pre-recorded or one that you record.You can also record the caller’s message into the Voice Memo list.

Activating Screen Call

To start Screen Call when you have incoming calls:

▶When the phone rings or vibrates, press Options (right softkey) >ScreenCall.

To set Auto Screen Call:

1.Select >Tools>VoiceServices>ScreenCall>Auto.

2.Select On and press .

3.Set the answering time by using numeric keys or by pressing the navigation key up or down.

4.Press or OK (left softkey). (The icon is displayed on the standby display.)

Tip: If a new caller’s message is waiting, appears on the display. The memos recorded while activating “Screen Call”are shown with a “ ”or “ ”icon in the list (“ ”: once played, “ ”: not played yet). To listen to the message, see “ReviewingVoice Memos”on page 125.

Tip: While the caller’s message is being recorded, press to answer the

call, or press to stop recording and disconnect the call.

126 Section 2H: Using Your Phone’s Voice Services