Sprint Nextel SCP-3100 Receivinga SprintPCS Ready Link Call, ToreceiveaSprintPCSReadyLinkcall

Receivinga SprintPCS Ready Link Call

ToreceiveaSprintPCSReadyLinkcall:

1.Make sure your phone’s Sprint PCS Ready Link mode is enabled. (See “Setting Sprint PCS Ready Link Mode”on page 154.)

2.When you receive a Sprint PCS Ready Link call from a contact, “R-Link Call,”the contact’s name, and the Sprint PCS Ready Link number appear on the display. (You do not need to take any action to answer the call.)

■When you receive a group call, “Group Call,”the group member’s name, and the Sprint PCS Ready Link number appear.

■If nobody takes the floor for 20 seconds, the call will be a missed Ready Link call.

3.If the person placing the call has kept the floor (held the Ready Link/Memo button), you will see the contact name and Sprint PCS Ready Link number along with “has floor,”and you will hear the caller speaking.

4.When the caller finishes speaking and releases , you will see “Floor is open.”on the display screen. Press

and hold to take the floor and reply to the caller. (You will see “You have floor.”and hear a tone confirming that you may speak.)

5.When the conversation is finished, press .

Tip: You can also receive a SprintPCS Ready Link call with the flip closed.

Press and hold to take the floor when the floor is open.

Note: You can change the volume and the speaker setting while a

SprintPCS Ready Link call is activated. Volume: Adjustthe voice volume by

using or by pressing the navigation key up or down exceptwhen you

are pressing and holding . Speaker: Switch the speaker on or off by

pressing .

162 Section 2J: Using Sprint PCS Ready Link