Operating

Selecting an input signal (continued)

1. Press the VIDEO button on the remote control to select an input for video signal.

Each time you press the button, the projector switches its video input port as below.

COMPONENT (Y, CB/PB, CR/PR)  S-VIDEO  VIDEO

LASER

INDICATOR

STANDBY/ON VIDEO

RGB

MY SOURCE/

DOC.CAMERA

●While TURN ON is selected for AUTO SEARCH item in OPTION menu, the

projector will keep checking every port sequentially till an input signal is detected (44). If VIDEO button is pushed when RGB 1 or RGB 2 port is selected, the projector will check COMPONENT port first.

1. Press the MY SOURCE / DOC. CAMERA button on the remote control. The input signal will be changed into the signal you set as MY SOURCE(46).

LASER

INDICATOR

STANDBY/ON VIDEO

RGB

MY SOURCE/

DOC.CAMERA

●This function also can use for document camera. Select the input port that connected the document camera.

Searching an input signal

1. Press the SEARCH button on the remote control.

The projector will start to check its input ports in order to find any input signals.

When an input is found, the projector will stop searching and display the image. If no signal is found, the projector will return to the state selected before the operation.

RGB 1  RGB 2  HDMI  MIU

VIDEO  S-VIDEO  COMPONENT (Y, CB/PB, CR/PR)

Selecting an aspect ratio

LASER

INDICATOR

STANDBY/ON VIDEO

RGB

MY SOURCE/

DOC.CAMERA

SEARCH

1. Press the ASPECT button on the remote control.

Each time you press the button, the projector switches the mode for aspect ratio in turn.

 For an RGB or MIU signal NORMAL  4:3  16:9  SMALL

For an HDMI signal

NORMAL  4:3  16:9  14:9  SMALL

ASPECT

For a video signal, s-video signal or component video signal 4:3  16:9  14:9  SMALL

For no signal 4:3 (fixed)

●The NORMAL mode keeps the original aspect ratio of the signal.

19