MIU menu

MIU menu (continued)

Item

 

Description

 

 

 

 

 

 

 

Use the ▲/▼ buttons to select

 

 

 

the transfer rate.

 

 

 

(M : Mbps : Megabits per second)

 

 

AUTO54M48M36M24M18M

 

SPEED

 

1M2M5.5M6M9M11M12M

 

 

 

 

• The AUTO mode automatically

 

 

 

selects the optimum rate.

 

SETUP

• Transfer rates may change due

to the network situation.

 

(continued)

 

 

 

Use the ▲/▼ buttons to select

 

 

 

 

 

 

the network mode.

 

 

 

WIRELESS  WIRED

 

 

NETWORK

• The network mode will be initialized whenever

 

MODE

the power is turned on with the power switch.

The WIRELESS will be enabled when the wireless network card is inserted.

The WIRED will be enabled when the wireless network card is not inserted.

(1)Use the▲/▼ buttons on the MIU menu to select the PROJECTOR NAME menu and press the ► button. The PROJECTOR NAME dialog will be displayed.

(2)The current PROJECTOR NAME will be displayed on the first 3 lines. If not yet written, the lines will be blank.

Use the ▲/▼/◄/► buttons and the ENTER or INPUT button to select and enter characters. The RESET button can be used to erase 1 character at a time. Also if you move the cursor to DELETE or ALL CLEAR on screen and push the ENTER or INPUT button, 1 character or all characters will be

PROJECTOR

erased. The PROJECTOR NAME can

NAME

be input up to 64 characters.

(3)To change an already inserted character, press the ▲/▼ button to move the cursor to one of the first 3 lines, and use the ◄/► buttons to move the cursor on the character to be changed. After pressing the ENTER or INPUT button, the character is selected. Then, follow the same procedure as described at the item (2) above.

(4)To finish entering text, move the cursor to the SAVE on screen and press the ENTER or INPUT button.

To revert to the previous PROJECTOR NAME without saving changes, move the cursor to the CANCEL on screen and press the ENTER or INPUT button.

(continued on next page)

61