MIU menu

MIU menu

The MIU (Multi Information processing Unit) is a function to support the Network features and PC-LESS Presentation. Consult with your network administrator before connecting to an existing access point on your network. Incorrect network settings on this projector may cause trouble on the network. Select “MIU” from the main menu to access the following functions.

Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it according to the following table.

See the User’s Manual - Network Guide for details of MIU operation.

NOTE • The factory default setting for DHCP is TURN OFF. If your network has DHCP enabled, and needs to set IP ADDRESS, SUBNET MASK and DEFAULT GATEWAY automatically, please set DHCP to TURN ON (58).

•If you are not utilizing SNTP (Date/Time Settings of the User’s Manual - Network Guide), then you must set the DATE AND TIME (59) during the initial installation.

Item

Description

Selecting this item sets the projector onto the “Live Mode”.

On the “Live Mode”, the projector displays the images from the PC LIVE MODE via Network, supported by “Live Viewer 3” software. (Live Mode of

the User’s Manual - Network Guide 5)

Selecting this item displays the LIVE MODE SETTING menu.

Use the ▲/▼ buttons to select an item, and the ► or ENTER button to perform the item.

 

 

The Presenter Mode that is set in the "Live Viewer 3" software

 

 

installed into your PC can be turned to off.

 

 

A message, QUIT PRESENTER MODE, will

LIVE MODE

be displayed in about 3 seconds when the

function is performed. The function is available only when the

SETTING

 

QUIT

Presenter Mode is set to on in the the "Live Viewer 3" software.

 

PRESENTER

The current setting of the Presenter Mode is shown in the menu.

 

MODE

• The Presenter mode is a function that allows the projector

 

 

to display an image sent by 1 PC only, even though the

 

 

MIU feature on this projector support Multi PC mode.

 

 

• If the projector is required to display an image sent by

 

 

other PC, execute the QUIT PRESENTER MODE function.

 

 

• See the User’s Manual – Network Guide for details.

(continued on next page)

 

55