MIU menu
MIU menu (continued)
Item | Description |
Selecting this item displays the MIU SETUP menu.
Use the ▲/▼ buttons to select an item, and the ► or ENTER button on the remote control to perform the item.
|
| Use the ▲/▼ buttons to turn DHCP on/off. |
|
| ON OFF |
| DHCP | Select OFF when the network does |
| not have DHCP enabled. | |
| (Dynamic Host | • When the “DHCP” setting changes to “ON”, |
| Configuration | |
| it takes a little time to obtain IP address from | |
| Protocol) | |
| DHCP server. | |
|
| • Auto IP function will be assigned an IP |
|
| address if the projector could not obtain an IP |
|
| address from server even if DHCP is “ON”. |
|
| Use the ▲/▼/◄/► |
|
| buttons to enter the IP |
|
| ADDRESS. This function |
|
| can only be used when |
| IP ADDRESS | DHCP is set to OFF. |
SETUP | • The IP ADDRESS is the number that identifies this | |
|
| projector on the network. You cannot have two devices |
|
| with the same IP ADDRESS on the same network. |
|
| • The IP ADDRESS “0.0.0.0” is prohibited. |
|
| Use the ▲/▼/◄/► |
|
| buttons to enter the same |
|
| SUBNET MASK used by |
| SUBNET MASK | your PC. This function |
|
| can only be used when |
|
| DHCP is set to OFF. |
|
| • The SUBNET MASK “0.0.0.0” is prohibited. |
|
| Use the ▲/▼/◄/► |
|
| buttons to enter the |
|
| DEFAULT GATEWAY |
| DEFAULT | (a node on a computer |
| network that serves as an | |
| GATEWAY | |
| access point to another | |
|
| network) address. |
|
| This function can only be used when DHCP is |
|
| set to OFF. |
|
| Use the ▲/▼/◄/► |
| DNS SERVER | buttons to input the DNS |
| server address. The DNS | |
|
| server is a system to control |
|
| domain names and IP addresses on the Network. |
(continued on next page) |
| |
58 |
|
|