MIU menu
MIU menu (continued)
Item | Description |
Selecting this item displays the
| • The PROJECTOR NAME is displayed. | |
INFORMATION | • Nothing (blank) is shown in the “PROJECTOR NAME” and “SSID” field | |
until you setup those items. (63, 64) | ||
|
•When the voltage level of the battery for the built in clock decreases, the
set time may become incorrect even though accurate date and time are input. Replace the battery suitably. (71)
•MAC wireless will not be displayed when the NETWORK MODE is set to the WIRED even if the wireless network card is mounted.
•IP ADDRESS, SUBNET MASK and DEFAULT GATEWAY indicate “0.0.0.0” in the following condition.
(1) The NETWORK MODE is set to the WIRELESS and the wireless network card is not mounted.
(2) DHCP is ON and the projector does not get address from DHCP server.
•Nothing (blank) is shown in the “CH”, “SPEED” and “MAC WIRELESS” field in case of either no wireless network card is inserted or “WIRED” mode is selected at NETWORK MODE, or both.
•The actual performance and setting will be shown in the “CH ” and “SPEED” field, instead of the setting value in the SETUP menu.
| Selecting this item displays the SERVICE menu. | ||||||
| Use the ▲/▼ buttons to select an item, and the | ||||||
| ► or |
|
|
|
|
|
|
|
|
| ENTER | button on the remote control to | |||
|
|
| |||||
| perform | the item. | |||||
| MIU RESTART | ||||||
| Use the ▲ button to restart the network communication. The network | ||||||
SERVICE | communication will be cut off once and restarted. | ||||||
|
|
|
|
|
|
| |
EXECUTE CANCEL
•After selecting the EXECUTE, the MIU menu may not be controlled approximately 20 seconds.
•If DHCP is ON, IP address may be changed.
63