SRS Labs CP-X809 Maintenance, Lamp, (3), (4), (5), NOTE, Replacing the lamp, Type number = DT00873, 2. Prepare a new lamp, In case of replacement by yourself

Maintenance

Lamp

A lamp has ﬁnite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended. To prepare a new lamp, contact your dealer and tell the lamp type number.

Type number = DT00873

Replacing the lamp

1. Turn the projector off, and unplug the power cord. Allow the projector to cool for at least 45 minutes.

2. Prepare a new lamp.

If the projector is mounted on a ceiling, or if the lamp has broken, also ask the dealer to replace the lamp.

The lamp cover

In case of replacement by yourself,

3. Loosen the screw (marked by arrow) of the lamp cover and then slide the lamp cover to the side to remove it.

4. Loosen the 3 screws (marked by arrow) of the lamp, and slowly pick up the lamp by the handles.

5. Insert the new lamp, and retighten ﬁrmly the 3 screws of the lamp that are loosened in the previous process to lock it in place.

The handles

6. Slide the lamp cover back in place and ﬁrmly fasten the screw of the lamp cover.

7. Turn the projector on and reset the lamp time using the LAMP TIME item in the OPTION menu (45).

(1) Press the MENU button to display a menu.

(2) Point at the “Go to Advanced Menu …” in the menu using the ▼/▲ button, then press the ► button.

(3)Point at the “OPTION” in the left column of the menu using the ▼/▲button, then press the ► button.

(4)Point at the “LAMP TIME” using the ▼/▲ button, then press the ► button. A dialog will appear.

(5)Press the ▲ button to select “RESET” on the dialog. It performs resetting the lamp time.

NOTE • Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp.