SRS Labs CP-X809 OPTION menu, From the OPTION menu, items shown in the table below can be performed

OPTION menu

From the OPTION menu, items shown in the table below can be performed.

Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item, except for the items LAMP TIME and FILTER TIME. Then perform it according to the following table.

Item	Description

Using the ▲/▼ buttons turns on/off the automatic signal search function.

TURN ON TURN OFF

When the TURN ON is selected, detecting no signal automatically cycles through input ports in the following order. The search is started from the

AUTO SEARCH current port. Then when an input is found, the projector will stop searching and display the image.

RGB 1 RGB 2 HDMI MIU COMPONENT S-VIDEO VIDEO

•The MIU input is skipped, as long as no image is sent from PC on the “Live Mode” (55).

Using the ▲/▼ buttons turns on/off the automatic keystone function.

TURN ON TURN OFF

	TURN ON : Automatic keystone distortion correction will be
	executed whenever changing the slant of the projector.
AUTO	TURN OFF : This function is disabled. Please execute the AUTO
KEYSTONE	KEYSTONE EXECUTE in the SETUP menu for automatic
	keystone distortion correction.

•When the projector is suspended from the ceiling this feature will not function properly so select the TURN OFF.

•This function will be unavailable when the Transition Detector is on (52).

Using the ▲/▼ buttons turns on/off the AUTO ON function.

TURN ON TURN OFF

	When set to the TURN ON, the lamp in projector will be
	automatically turned on without the usual procedure (17), only
AUTO ON	when the projector is supplied with the power after the power was
AUTO ON	cut while the lamp was on.

•This function does not work as long as the power has been supplied to the projector while the lamp is off.

•After turning the lamp on by the AUTO ON function, if neither input

nor operation is detected for about 30 minutes, the projector is turned off, even though the AUTO OFF function (45) is disabled.

(continued on next page)