AUDIO menu

AUDIO menu

From the AUDIO menu, items shown in the table below can be performed.

Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it according to the following table.

NOTE • The speaker sound may distorted or the case may be trembling when the volume is too high or treble/bass is emphasized or WOW is activated. In that case, make the volume reduced, bass/treble low or WOW effect to be weakend.

Item

Description

 

 

VOLUME

Using the ▲/▼ buttons adjusts the volume.

High  Low

 

TREBLE

Using the ▲/▼ buttons adjusts the treble level.

High  Low

 

BASS

Using the ▲/▼ buttons adjusts the bass level.

High  Low

 

 

Using the ▲/▼ buttons switches the mode for SRS WOW mode.

 

HIGH  MID  TURN OFF

SRS WOW

• SRS WOW® accomplishes this by providing a panoramic three-

 

 

dimensional audio image that extends the sound field in both the

 

horizontal and vertical planes, and lowers the perceived bass

 

response well beyond the low frequency limitations of the drivers.

 

Adjust it depending on the user's preference.

SPEAKER

Using the ▲/▼ buttons turns the speaker function on/off.

TURN ON  TURN OFF

 

• When the TURN ON is selected the built-in speaker works.

Allocates the audio ports.

(1)Choose a picture input port using the ▲/▼ buttons.

QUIT  RGB1  RGB2  HDMI  MIU

AUDIO OUT STANDBY  VIDEO  S-VIDEO  COMPONENT

(2)Select the audio port to be interlocked with

the input port using the ◄/► buttons. 1  2  3  4   H/M

AUDIO

• “M” and “H” are abbreviations of MIU and HDMI.

 

• M or H can be selected for MIU or HDMI port only.

When M or H is selected, the audio signal to MIU or HDMI port will be output if MIU or HDMI is chosen as a display source.

• disables the audio output.

•When is selected to VIDEO, S-VIDEO or COMPONENT port, the C.C. (Closed

Caption) is automatically activated, if the C.C. is set to AUTO in the DISPLAY item of the C.C. menu and the signal from the input port supports the C.C. feature (64).

The HDMI AUDIO is set to 1 as default. In case the HDMI audio

HDMI AUDIO does not work well, try 2. 1  2

38