INPUT menu

INPUT menu

From the INPUT menu, items shown in the table below can be performed.

Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it according to the following table.

Item

Description

Using the ▲/▼ buttons switches the progress mode.

TV  FILM  TURN OFF

• This function is performed only for an interlaced signal at

the VIDEO or S-VIDEO input, and for 480i@60, 576i@50 or PROGRESSIVE 1080i@50/60 signal at the COMPONENT or HDMI input.

•When TV or FILM is selected, the screen image will be sharp. FILM adapts to the 2-3 Pull-Down conversion system. But these may cause a certain defect (for example, jagged line) of the picture for a quick moving object. In such a case, please select TURN OFF, even though the screen image may lose the sharpness.

 

Using the ▲/▼ buttons switches the noise reduction mode.

 

HIGH  MID  LOW

VIDEO NR

• This function is performed only for the VIDEO or S-VIDEO

input, and for 480i@60, 576i@50 or 1080i@50/60 signal at the

 

 

COMPONENT or HDMI input.

•When this function is excessive, it may cause a certain degradation of the picture.

Using the ▲/▼ buttons switches the 3D-YCS mode.

STILL  MOVIE  TURN OFF

3D-YCS

• This function performs only at a VIDEO input of NTSC, and PAL.

•MOVIE is the mode for images with a lot of motions like movies, and STILL is the mode for images with few motions or completely still ones like slides.

 

Using the ▲/▼ buttons switches the mode for color space.

 

AUTO  RGB  SMPTE240  REC709  REC601

COLOR SPACE

• This item can be selected only for an RGB signal or a component

video signal (except 480i@60, 576i@50 and SCART RGB).

 

•The AUTO mode automatically selects the optimum mode.

•The AUTO operation may not work well at some signals. In such a case, it might be good to select a suitable mode except AUTO.

(continued on next page) 32