SETUP menu
Item |
|
|
|
| Description | |||||
|
|
|
|
|
|
|
|
|
| |
| Using the ▲/▼ buttons corrects the horizontal keystone distortion. | |||||||||
| Shrink the right of the image Shrink the left of the image | |||||||||
| • The adjustable range of this function will vary among inputs. For | |||||||||
| some input, this function may not work well. | |||||||||
| • When the zoom adjustment is set to the TELE (telephoto focus), | |||||||||
KEYSTONE | this function may be excessive. This function should be used when | |||||||||
| the zoom adjustment is set to the full WIDE | |||||||||
| whenever possible. | |||||||||
| • When the vertical lens shift is not set fully upward (not set fully | |||||||||
| downward for the optional lens type | |||||||||
| function may not work well. | |||||||||
| • This function will be unavailable when the Transition Detector is on (52). | |||||||||
| Using the ▲/▼ buttons turns off/on the whisper mode. | |||||||||
WHISPER | NORMAL WHISPER | |||||||||
• When the WHISPER is selected, acoustic noise and screen | ||||||||||
| ||||||||||
| brightness are reduced. | |||||||||
|
|
|
|
|
|
|
|
|
| |
| Using the ▲/▼ buttons switches the mode for mirror status. | |||||||||
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
MIRROR | NORMAL H:INVERT V:INVERT H&V:INVERT |
If the Transition Detector is TURN ON and MIRROR status is changed, Transition Detector Alarm (52) will be displayed when projector is restarted after the power switch is turned off.
The combination of a picture shown on screen and output from the RGB OUT port can be arranged in the menu.
The picture coming into the port selected in the (2) is output to the RGB OUT port while an image from the port chosen in the (1) is on screen.
(1)Choose a picture input port using ▲/▼ buttons.
QUIT RGB1 RGB2 HDMI MIU 
STANDBY VIDEO
• Choose STANDBY, to select the output signal from the RGB OUT
port in the standby mode.
MONITOR OUT • While QUIT is selected, pressing the ◄ button returns to the previous menu.
(2) Select one of the RGB ports using ◄/► buttons.
Choosing the RGB1 allows the following choice. RGB1 OFF
Choosing the RGB2 allows the following choice.
RGB2 OFF
Choosing other input or STANDBY allows the following choice.
RGB1 RGB2 OFF
• OFF disables the RGB OUT port.
(continued on next page) | 37 |