Star Micronics LC-1021 Control Panel Operations, Switching between on-line and off-line

20

Chapter 2: Control Panel Operations

The control panel gives you push-button control over the printer’s operations. It includes indicator lights, which tell you the current status of the printer at a glance.

HS-DRAFT/DRAFT	BANK	SW
ROMAN	A1	D4
SANSERIF
COURIER	B2	E5
PRESTIGE		F6
ORATOR	C3

FONT

10 CPI

12 CPI

COND

		MICRO FEED
PROP
PITCH	SET/EJECT	FORM FEED	LINE FEED
	PARK

POWER

ON LINE

EDS c BANK SWITCH STATUS ON/OFF PRINT

EXIT

This chapter describes control panel functions that can be performed while the printer is turned on and either on-line or off-line. The buttons perform different functions in the EDS and Dot Adjustment Modes. Functions of control panel buttons in these modes are described in the relevant sections covering them.

Switching between on-line and off-line

❏Press ON LINE to switch the printer between being on-line and off-line.

❏When the printer is on-line, the ON LINE indicator is lit and the printer can receive data from the computer. You should make sure that the printer is on- line whenever you are trying to print.

❏When the printer is in off-line, the ON LINE indicator goes out, which means that the printer cannot receive any data.

❏Note that you can also press ON LINE while a printing operation is in progress to stop the printing.

Important!

Make sure that the on-line/off-line setting of the printer is correct before performing a control panel operation.