Star Micronics LC-6211 user manual Unparking fanfold paper, Using the tear-off function

The printer feeds the perforation of the fanfold paper to the tear-off edge of the printer cover.

❏ Tear off the paper.

❏ When you resume printing, the printer reverse feeds the paper to its former position.

Unparking fanfold paper 13

❏Set the release lever on the back of the printer to the cut-sheet position.

The paper is now parked, and you can load cut-sheet paper into the printer using the procedures under “Manual sheet feeding” on page 27.

Unparking fanfold paper

After you are finished printing on cut-sheet paper, use the following procedure to unparkin fanfold paper and make it available for printing.

❏If any cut-sheet paper is still in the printer, put the printer off-line and then press the control panel’s SET/EJECT/PARK button to eject it.

❏Check to make sure the printer is off-line.

❏Set the release lever on the back of the printer to the fanfold position.

❏Press the control panel’s SET/EJECT/PARK button. The printer automatically feeds the fanfold paper back into position, ready for printing.

Using the tear-off function

The following procedure makes it easy to tear off fanfold paper without disturbing the current position of the paper.

❏Check to make sure that the printer is on-line.

❏Press the control panel’s SET/EJECT/PARK button.