Star Micronics LC-6211 user manual Paper loading, Line feed, Paper eject cut-sheet paper

Paper loading 17

Paper loading

❏Prepare either cut-sheet or fanfold paper for feeding.

For details on how to prepare for paper feeding, see page 8 for fanfold paper and page 27 for cut-sheet paper.

❏The POWER indicator flashes to indicate there is no paper in the printer.

❏Press SET/EJECT/PARK to feed the paper into the printer.

Line feed

❏Make sure the printer is off-line (ON LINE indicator is not lit).

❏Press LINE FEED once to feed paper one line. Holding down LINE FEED continually feeds paper, one line at a time, until you release the button.

Paper eject (cut-sheet paper)

❏Make sure the printer is off-line (ON LINE indicator is not lit).

❏Press SET/EJECT/PARK to eject the paper.

❏After the paper is ejected, the printer will beep and the POWER indicator will flash to indicate there is no paper in the printer.

❏Later, you can press SET/EJECT/PARK again to feed the paper back into the printer.

Form feed (fanfold paper)

❏Make sure the printer is off-line (ON LINE indicator is not lit).

❏While holding down LINE FEED, press ON LINE to feed the paper to the top of the next page.