Star Micronics LC24-15 user manual Select draft quality characters, Select LQ characters

Many commands have alternative forms. Some commands use <ES3 (character code 27) in Standard mode and cFS> (character code 28) in IBM mode. Other commands have parameters that can be specified as either character codes or digit characters, like the parameter 1 in the sample command above.

FONT CONTROL COMMANDS

Select draft quality characters

Mode	ASCII			Decimal		Hexadecimal
	&(.I 46 L‘(“ “F’ ‘.),, ,.)., -y			40 40 70 41 41 57		28 28 48 29 29 3			--
Both	<ESC>	“x”	“0”	27 120	48	16	78	30
	<ESC>	“X”	co>	27 120	0	16	78	00

Changes from letter quality to draft quality. Ignored if the (STYLE) button was pressed during power-up.

Select LQ characters

Mode	ASCII			Decimal		Hexadecimal
Both	<ESC>	“x0	“1”	27 120	49	10	78	31
	<ESC>	‘Ix”	cl>	27 120	1	1B	78	01

Changes from draft quality to letter quality. The initial font style is Courier unless a different style has been selected by a preceding

command. Ignored if the (m) button was pressed during power-

UP-

Select LQ font style

Mode	ASCII			Decimal			Hexadecimal
Both	<ESC>	“k”	fl’	27	107	n	1B	6B	n
Std.	<FS>	“C”	n	28	67	n	1C	43	n

Selects an LQ font style according to the value of n. In draft mode, this command remains dormant and takes effect later when LQ is selected by cESC> “x” 1. Ignored if the (STYLE)button was pressed during power-up.

38