Star Micronics LC24-15 user manual Select double or quadruple size, Select character size

Select double or quadruple size

Mode	ASCII	Decimal	Hexadecimal
Both	<ESC> “Y n	27 104 n	IlB 69 n

Selects the size of subsequent characters as shown below. Extra- high characters align along the cap-line of normal characters, with the base line temporarily moving down. Line spacing is temporarily doubled when n = 1 and quadrupled when n = 2.

n Effect

0 Normal size

1 Double-high, double-wide

2 Quadruple-high, quadruple-wide

Select character size

(Mode	1	ASCII					I	Decimal	I Hexadecimal	I
	I								I
Boti	1	,,(,,	.&(&,	,,s,.	,.),,	,,>,,	n i	40 40 03 41 41 n	20 20 53 29 29	n

Selects a combination of character height and width according to the value of n, as below. Does not move the base line.

n	Character width		Character height
0	Single	width	Single height
1	Double	width	Single height
2	Single	width	Double	height
3	Double width		Double	height

Print double-height characters

IMode I	ASCII			I Decimal			I Hexadecimal			1	-_
Both	<ESC>	“w”	“1”	27 119		49	1B	77	31
	cESC>	“w”	<l>	27 119		1	1B	77	01
std.	<FS>	“V”	“1”	20	a6	49	1c	56	31
	<FS>	“v”	<l>	20	a6	i	ic	56	01

Prints subsequent characters at double height without moving the base line, and without changing the line spacing.

50