Star Micronics LC24-15 user manual Se/ect graphics mode, Convert graphics, density

Se/ect graphics mode

Mode	ASCII				Decimal	Hexadecimal
IBM	<ESC> “[” “g”	nl		n2	27 91 103 nl n2	1B 58	67	nl n2
	m0	ml	m2	. . .	m0 ml m.2...	m0	ml	m2...

Selects one of eight graphics modes depending on the value of m0 and prints dot graphics in this mode. The graphic image is (nl + n2 x 256) - 1 dots wide. See &SC> “K” ( for &bit graphics) or <FS> “Z” (for 24-bit graphics) for information on ml, m2, ...

m0	Graphics mode
0	8-bit Normal-density	( 60 dots per inch)
1	8-bit Double-density	( 120 dots per inch)
2	8-bit Double-density, double-speed
3	8-bit Quadruple-density	(240 dots per inch)
8	24-bit Normal-density	( 60 dots per inch)
9	24-bit Double-density	( 120 dots per inch)
11	24-bit Triple-density	( 180 dots per inch)
12	24-bit Hex-density	(360 dots per inch)

Convert graphics		density
Mode	ASCII		Decimal	Hexadecimal
Both	<ESC> I’?” n	m	2763 nm	16 3F n m
	Converts graphics defined by subsequent <ES0 “K”, <ES0 “L”,
	<ES0 “Y” or <ESC> “2” commands to a density mode defined by
	<ES0 “*“. n is “K”, “L”, “Y” or ‘7, indicating the mode to be
	converted. m is a code from <O>to <4> or <6> indicating one of the
	modes of <ES0	“*“.

68