Star Micronics LC24-15 user manual I Other Printer Control Commands, Set MSB to, Accept MSB as is

I

OTHER PRINTER CONTROL COMMANDS

Set MSB to I

Mode	ASCII	Decimal	Hexadecimal
Both	<ES& “>”	27 62	1B 3E

Sets the most significant bit of each subsequent byte received to 1, allowing users with a 7-bit interface to access characters with ASCII codes greater than 127.

Set MSB to 0

Mode	ASCII		Decimal		Hexadecimal
Std.	<ESC>	“=”	27	61	16	3D
IBM	<FS>	‘,=V	26	61	1C	3D

Sets the most significant bit of each subsequent byte received to 0.

Accept MSB as is

Mode	1	ASCII	Decimal	Hexadecimal
Both	1	<ESC> ‘W’	27 35	1B 23

Cancels the preceding commands and accepts the most significant bit as it is sent to the printer.

Delete last character sent

Mode	ASCII	Decimal	Hexadecimal
Std.	<DEL>	127	7F

Deletes the last character received. Ignored if the last character received, has already been printed, or if the last character received was all or part of a command.

Cancel last line

Mode	ASCII	Decimal	Hexadecimal
Both	<CAN>	24	10

Deletes the last line currently present in the print buffer.