Star Micronics LC24-15 Perform one n/180-inch or n/2164nch line feed, Feed paper n lines, ESC “4”

Perform one n/180-inch or n/2164nch line feed

Mode	ASCII	Decimal	Hexadecimal
Both	<ESC> “J’ n	27 74 n	jlB4A	n

Feeds the paper once by n/180 inches (standard mode) or n/2 16 inches, where n is between 1 and 255. Does not move the print position right or left when DIP switch l-2 is OFF. Does not change the line-spacing setting.

Perform one n/216-inch reverse line feed

Mode	ASCII	Decimal	Hexadecimal
Std.	<ESC> “‘j” n	27106 n	IB 6A n

Feeds the paper once by n/21 6 inches in the reverse direction, where n is between 1 and 255. Does not move the print position right or left when DP switch l-2 is OFF. Does not change me line-spacing setting.

Feed paper n lines

Mode	ASCII				Decimal			Hexadecimal
Both	<ESC>	“f’	“1”	n	27 102	49	n	1B	66	31	n
	-	“f’	<l>	n			n
	<ESC>				27 102	1		18	66	01	n

Feeds the paper n lines from the current line, where n is between 0 and 127.

Set top of page at current position

Mode	1	ASCII	Decimal	Hexadecimal
IBM	1	<ESC> “4”	1 27 52	1 1B 34

Sets the current position as the top-of-page position. Note that this can also be done from the control panel.

56