Star Micronics LC24-15 user manual Print 8-bit double-density, double-speed graphics

Print 8-bit double-density, double-speed graphics

Mode

Both

ASCII			Decimal		Hexadecimal
cESC> ‘7” nl	n2		27 89 nl	n2	1B 59 nl	n2
ml	m2	...	ml	m2 ...	ml	m2 . . .

Prints bit-image graphics at 120 dots per inch horizontally (maxi- mum 1632 dots wide), skipping every second dot in the horizontal direction. See cESC> “K” for other information.

Print 8-bit quadruple-density graphics

Mode ASCIIDecimalHexadecimal

Both	<ESC> “Z” n1	n.2		27 90 nl	ni’	1B 5A nl	n2
	ml	m2	...	ml	m2 . . .	ml	m2 . . .

Prints bit-image graphics at 240 dots per inch horizontally (maxi- mum 3264 dots wide), skipping every second dot in the horizontal direction. See cESC> “K” for other information.

Print 249bit hex-density graphics

Mode	ASCII			Decimal	Hexadecimal
Both	<FS> “Z” nl	n2		27 90 nl d	1C 5A nl n2
	ml	m2 m3	. . .	ml m2 m3 . . .	ml m2 m3 . . .

Prints 24-bit dot graphics at 360 dots per inch horizontally. The graphic image is 24 dots high and nl + n2 x 256 dots wide. Maximum width is 13.6 inches (4896 dots). In the data ml, m2, m3

. .’. each three bytes represent 24 vertical dots. In the leftmost position, the most significant bit of ml is the top dot; the least significant bit of ml is the eighth dot from the top; the most significant bit of m2 is the ninth dot; the least significant bit of m2 is the sixteenth dot from the top; the most significant bit of m3 is the seventeenth dot from the top; the least significant bit of m3 is the bottom dot. The rest of the data is similar. The number of data bytes must be 3 x (nl + n2 x 256). Dots beyond the right margin are ignored. At the end of dot graphics printing the printer returns automatically to character mode.

66