Star Micronics LC24-15 Execute ES, Line feed, Reverse line feed, Sleet forward feed mode

Execute <ES&			“A”
Mode	ASCII		Decimal	Hexadecimal
IBM	<ESC>	“2”	27 50	1B 32

Sets the line spacing to the value defined by the last preceding <ES0 “A” command. Sets the line spacing to l/6 inch if there is no preceding <ES0 “A” command.

Line feed

Mode	ASCII	Decimal	Hexadecimal
Both	<LF>	10	OA

Prints the current line and feeds the paper to the next line. If DIP switch 1-2 is ON, also moves the next print position to the left margin. See the preceding commands for the line spacing.

Reverse line feed

Mode	ASCII	Decimal	Hexadecimal
Both	<ES& <LF>	27 10	1B OA

Prints the current line and feeds the paper in the reverse direction to the preceding line. If DIP switch l-2 is ON, also moves the next print position to the left margin. See the preceding commands for the line spacing. Ignored when friction feed is used.

Sleet forward feed mode

Mode	ASCII		Decimal	Hexadecimal
Std.	<FS>	“F’	20 70	1C 46

Cancels the reverse feed mode and selects forward feed mode. This is the default setting at power-up.

Select reverse feed mode

Mode	ASCII		Decimal	Hexadecimal
Std.	cFS>	“R”	26 02	1C 52

Selects reverse feed mode. Reverses the direction of all vertical movements. Ignored when friction feed is used.

55