FUNCTION
CODE
DEFINITION RANGE
OUTLINE
NOTE
Sets vertical tab stops <ESC> "B" n1 n2 ...nk <0> (1B)H (42)H n1 n2 ...nk (00)H
1 <= n1 <= n2 <= n3 ... < nk <= 255 <= 1 <= k <= 16
Cancels all current vertical tab stops and sets new vertical tab
stops at lines n1, n2, etc. where n1, n2, etc. are numbers between 1 and 255. A maximum number of 16 vertical tab positions can be set. Tab positions must be specified in ascending order; any violation of ascending order terminates the tab position list. Standard termination is by the <0> control code. Vertical tab positions are set in terms of the current line spacing and do not move if the line spacing is changed later.
If a tab set position <nk> is equivalent or smaller than <nk
preceding the tab set position, setting of vertical tab is assumed as complete.
24
