FUNCTION
CODE
HEX
OUTLINE
Sets the memory switch
<ESC> “# N, n1 n2 n3 n4” <LF> <NUL>
1B 23 N 2C n1 n2 n3 n4 0A 00
In order to enable changed memory switch settings, turn the
printer OFF and ON again or send the printer reset command (<ESC> “?” <LF> <NUL>) to the printer. Changed memory switch settings are stored in EEPROM and these settings will be stored until they are changed again.
N:Memory switch number (“0,” “1,” “2,” “3,” “4,” “5,” “6”)
n1 n2 n3 n4: Mode settings (For details see below.)
1)N = 0 (Star mode) n1: Always “0”
n2: Always “0”
Parameter | Setting | “0” (Default) | “1” |
| |
|
|
|
|
|
|
n3 |
| Destination | Standard | Asia Market |
|
|
|
|
|
|
|
n4 |
| FF command *1 | See below |
|
|
|
|
|
|
|
|
|
|
|
|
| |
n4 | <FF> command *1 |
|
|
| |
“0” to “3” | Feeds page |
|
|
| |
|
| ||||
“4” to “7” | Executes full cut after feeding paper to the cut | ||||
| position. (*2) |
|
|
| |
|
|
|
|
| |
“8” to “B” | Feeds page |
|
|
| |
“C” to “F” | Executes partial cut after feeding paper to the cut | ||||
| position. (*2) |
|
|
| |
*1: Only on printers that have an
*2: Paper feed to cutting position is executed in 1 inch incre- ments.
N = 0 (ESC/POS mode) n1: Always “0”
n2: Always “0”
n4: Always “0”
Parameter | Setting | “0” (Default) | “1” |
|
|
|
|
n3 | Destination | Standard | Asia Market |
|
|
|
|
37
