Star Micronics SP2000 manual Auto Cutter Control SP2500 type printers only, Function

1-2-6. Auto Cutter Control (SP2500 type printers only)

FUNCTION

CODE

OUTLINE

Full-cut command to the auto cutter

<ESC> "d" "0" or <ESC> "d" <0>

(1B)H (64)H (30)H or (1B)H (64)H (00)H

Full cut command. Executes a full cut after printing the data in the line buffer.

This command is valid only on SP2520/SP2560 series printers and is ignored on SP2320/SP2360 series printers.

FUNCTION

CODE

OUTLINE

FUNCTION

CODE

OUTLINE

Partial-cut command to the auto cutter

<ESC> "d" "1" or <ESC> "d" <1>

(1B)H (64)H (31)H or (1B)H (64)H (01)H

Partial cut command. Executes a partial cut after printing the data in the line buffer.

This command is valid only on SP2520/SP2560 series printers and is ignored on SP2320/SP2360 Õeries printers.

Full-cut command to the auto cutter after paper feed

<ESC> “d” “2” or <ESC> “d” <2>

(1B)H (64)H (32)H or (1B)H (64)H (02)H Paper feed + full cut command

Executes the following actions after printing the data in the line buffer.

(SP2520/2560) Feeds paper to the cutting position and executes a full cut (Note 1).

(SP2320/2360) Feeds paper to the tear bar position (Note 2). Note 1: Paper feed to cut position: Executed in 1 inch units. Note 2: Paper feed to tear bar position: Executed in 7/6 inch

units.

33