FUNCTION
CODE
OUTLINE
Transmits EOT status
<EOT>
(04)H
Transmits the EOT status of the printer to the host in
(Does not execute after taking fro reception buffer, but immedi- ately upon receiving from the host.) It is in a “Data ready” state when using a
•When one <EOT> command is sent to the printer, it will not send the next <EOT> command until the EOT status is received.
•When using the <EOT> command, always set the automatic status function to invalid.
EOT Status
b7 | b6 | b5 | b4 | b3 | b2 | b1 | b0 |
|
|
|
|
|
|
|
|
(Always 1)
Bit 2: Paper Near End
1: Near End
Bit 3: No Paper Error (Same as ENQ Bit 3) 1: Error
Bit1, Bit 5 to Bit 7 statsu unknown
44
