17
(9) Third track buffer read command (Model: 310)
This command acquires the third track buffer data of the following formats.
• 7-bit format conforming to JISX6302*
• Reverse 7-bit format Reverse direction writing format of the format above*
• 6-bit format conforming to ISO 7811/2 first track
• 4-bit format conforming to ISO 7811/2 second and third tracks
However, the second track is in 70 bpi format.
See the third track read command for details.
Note that this command cannot be used with on models with one magnetic stripe (TCP300).
*: The reading direction of JISX6302 conforming magnetic formats follows the preset memory
switch setting. See Model Setting Commands (91h) for details.
Command Transfer Formats
STX 2Bh ETX BCC
Response Transfer Formats
STX 2Bh Status Read Data String ETX BCC
(10) Reverse 7 bit format first track data setting command (Model: 310)
This command sets the write data to the first track with a reverse 7-bit format. Excluding 02h
(STX) and 03h (ETX), the write data string must be data from 01h to 7Eh in 0 to 69 bytes.
The starting and ending symbols, LRC and parity bit on the magnetic stripe are all
automatically applied. A reject response is issued when an error is detected in the write data.
Note that this command cannot be used with on models with one magnetic stripe (TCP300).
* This command generates magnetic strip data that is in the direction opposite to the 7 bit
format first track data setting command 38h.
Command Transfer Formats
STX 35h Write data string ETX BCC
Response Transfer Formats
STX 35h Status ETX BCC