21
(17) Second track data setting command (Models: 300/310)
This command sets the second track write data.
The magnetic format of the write data corresponds to the following formats, but the format that
is set abides by the content of the preset memory switches. See Model Setting Commands
(91h) for details.
• 7-bit format conforming to JISX6302
• Reverse 7-bit format Reverse direction writing format of the format above
• 6-bit format conforming to ISO 7811/2 first track
• 4-bit format conforming to ISO 7811/2 second and third tracks
However, the second track is in 70 bpi format.
The starting and ending symbols, LRC and parity bit on the magnetic stripe are all
automatically applied. A reject response is issued when an error is detected in the write data.
Command Transfer Formats
STX 3Ch Write data string ETX BCC
Response Transfer Formats
STX 3Ch Status ETX BCC
(18) Third track data setting command (Model: 310)
This command sets the third track write data.
The magnetic format of the write data corresponds to the following formats, but the format that
is set abides by the content of the preset memory switches. See Model Setting Commands
(91h) for details.
• 7-bit format conforming to JISX6302
• Reverse 7-bit format Reverse direction writing format of the format above
• 6-bit format conforming to ISO 7811/2 first track
• 4-bit format conforming to ISO 7811/2 second and third tracks
However, the second track is in 70 bpi format.
The starting and ending symbols, LRC and parity bit on the magnetic stripe are all
automatically applied. A reject response is issued when an error is detected in the write data.
Command Transfer Formats
STX 3Dh Write data string ETX BCC
Response Transfer Formats
STX 3Dh Status ETX BCC