56
• 24/16 dot font type specification (US/EU)
This command sets the US, and EU destined 24/16 dot fonts for AN characters. Settings
using the ESC sequence (ESC, F/f) in the print text data string are enabled only in one
electronic statement, but settings using this command function as default settings in the print
character data setting command 41h.
STX, 91h, ‘F’/‘f’, 24/16 font settings, ETX, BCC
24/16 font setting parameter
‘0’: Prints as 24 dot fonts
‘1’: Prints as 16 dot fonts
Ex-factory default settings are for 24 dot fonts.
This setting does not function on models other than Japanese specifications, GB2312 or
GB18030, and KR models.
• ANK character thickness specification
This command sets the narrow gothic/thick gothic settings for ANK characters. Settings using
the ESC sequence (ESC, B/b) in the print text data string are enabled only in one electronic
statement, but settings using this command function as default settings in the print character
data setting command 41h.
STX, 91h, ‘B’/‘b’, character width setting, ETX, BCC
Character width setting parameter
‘0’: Sets ANK characters to narrow gothic.
‘1’: Sets ANK characters to enhanced gothic.
Default settings are for narrow gothic fonts.
• Magnetic writing enabled track setting
This command sets the track to write magnetically. Settings using this command function as
default settings in the magnetic stripe write → idle command 31h and magnetic stripe write →
idle (status with no card) command 32h.
STX, 91h, ‘C’/‘c’, magnetic writing enable track setting, ETX, BCC
Magnetic write enable track setting parameter
‘0’: Prohibits magnetic writing
‘1’: Enables magnetic writing to track 1.
‘2’: Enables magnetic writing to track 2.
‘3’: Enables magnetic writing to track 1 and 2.
‘4’: Enables magnetic writing to track 3.
‘5’: Enables magnetic writing to track 1 and 3.
‘6’: Enables magnetic writing to track 2 and 3.
‘7’: Enables magnetic writing to track 1, 2 and 3.
The ex-factory default setting is for ‘2’, to enable magnetic writing to track 2.