46
(3) Card rear side idle command
This command transports and idles cards to the idling position on the rear side.
Regardless of whether the card in the device is waiting to be removed or is a process targeted
card, it is transported to the idling position on the rear side of the device and is idled there.
If there is no card in the device, the device waits until a card is inserted, then transports it to
the rear side where it is idled.
Idled cards are process targeted card.
If a card is not inserted after this command is issued, or to cancel the command, issue the
card insertion wait status cancel command (54h) after canceling the state of communication.
Command Transfer Formats
STX 51h ETX 52h
Response Transfer Formats
STX 51h Status ETX BCC
(4) Card insertion wait status cancel command
This command cancels the card insertion wait status.
The state in which the device waits for a card to be inserted to the inlet, by the execution of the
magnetic stripe read command, magnetic stripe write command, the erase + print command,
the erase command or the card front/rear idle command is called the card insertion wait state,
but this command cancels the card insertion wait status.
This command can be executed while executing a command (special command). When this
command is executed, the prior, executing command is cancelled.
Command Transfer Formats
STX 54h ETX 57h
Response Transfer Formats
STX 54h Status ETX BCC