55
Setting Type and Parameter List (Types are set alphabetic characters and parameter are set
by numerical values)
Contents Type Parameters Functions Initial
Value
‘0’ Two-byte font specification ANK fonts sizes ‘J’/‘j’ ‘1’ Single-byte font specification ‘1’
‘0’ 24 dot font specification 24/16 dot font types ‘F’/‘f’ ‘1’ 16 dot font specification ‘0’
‘0’ Narrow gothic specification ANK character
thickness ‘B’/‘b’ ‘1’ Enhanced gothic specification ‘0’
Enable magnetic
writing track ‘C’/‘c’ ‘0’ to ‘7’ See explanation ‘2’
Enable magnetic
reading track ‘R’/‘r’ ‘0’ to ‘7’ See explanation ‘2’
‘0’ Vertical Card arrangement ‘P’/‘p’ ‘1’ Horizontal ‘0’
Magnetic stripe retry
count ‘W’/‘w’ ‘0’ to ‘7’ Specifies number of retries. ‘2’
Cleaning ‘U’/‘u’ ‘0’ to ‘7’ Print head cleaning count ‘3’
Two-byte character
space ‘D’ ‘0’ to ‘F’ Character space dot count ‘2’
Single-byte
character space ‘d’ ‘0’ to ‘F’ Character space dot count ‘2’
Character space ‘M’/‘m’ ‘0’ to ‘F’ Line space dot count ‘2’
LED control ‘L’/‘l’ ‘0’ to ‘3’ LED control method specification ‘0’
Initialize ‘Z’/’z’ ‘0’
Returns device to ex-factory
default settings. ―
‘0’ Reading direction conforming to
JISX6302
Magnetic format
reading direction
conforming to
JISX6302
‘K’/‘k’ ‘1’ Opposite direction conforming to
JISX6302
‘0’
‘10’ to ‘14’ First track writing data format
setting ‘11’
‘20’ to ‘24’ Second track writing data format
setting ‘22’
Magnetic stripe
format ‘E’/’e’
‘30’ to ‘34’ Third track writing data format
setting ‘33’
• ANK character font size specification (JP)
This command sets the two-byte and single-byte fonts for ANK characters. Settings using the
ESC sequence (ESC, J/j) in the print text data string are enabled only in one electronic
statement, but settings using this command function as default settings in the print character
data setting command 41h.
STX, 91h, ‘J’/‘j’, ANK font settings, ETX, BCC
ANK font setting parameter
‘0’: Prints ANK characters as two-byte font s.
‘1’: Prints ANK characters as single-byte fonts.
ANK fonts when the device is sent from the factory are set to be single-byte fonts.
This setting does not function on models other than Japanese specifications.