29
• ESC d
Sets the dot space for gaps in single-byte characters. Dot spaces are applied to the right side of
characters.
ESC ‘d’ next parameter range: ‘0’ to ‘F’ 1 digit configuration
• ESC W/w
Sets the width size of characters to expand.
ESC ‘W’/’w’ next parameter range: ‘1’ to ‘2’ 1 digit configuration
ESC “W1” Specifies normal width fonts.
ESC “W2” Specifies double width fonts.
• ESC V/v
Sets the vertical size of characters to expand.
ESC ‘V’/’v’ next parameter range: ‘1’ to ‘2’ 1 digit configuration
ESC “V1” Specifies normal height fonts.
ESC “V2” Specifies double tall fonts.
• ESC B/b
Specifies the line width of ANK characters.
ESC ‘B’/’b’ next parameter range: ‘0’ to ‘2’ 1 digit configuration
ESC “B0” Specifies normal narrow gothic fonts.
ESC “B1” Specifies enhanced gothic fonts.
ESC “B2” Specifies double-enhanced gothic fonts.
• ESC J/j
Sets double/single byte fonts as ANK characters.
ESC ‘J’/’j’ next parameter range: ‘0’ to ‘1’ 1 digit configuration
ESC “J0” Specifies two-byte gothic fonts.
ESC “J1” Specifies single-byte gothic fonts.
ANK character double-byte specifications are valid only on Japanese models.
• ESC F/ f
Sets 24/16 dot fonts for ANK characters.
ESC ‘F’/’f’ next parameter range: ‘0’ to ‘1’ 1 digit configuration
ESC “F0” Specifies 24 dot fonts.
ESC “F1” Specifies 16 dot fonts.
JP, GP2312 or GB18030, BIG5 and KR models do not use 16 dot fonts.
(4) Internal image data 1 expand command
(Contact our sales representative for destination country.)
This command expands images specified by an expansion image number from among the
image data stored in the reader/writer flash ROM1, in the print expansion buffer.
Image data is that which is expanded to the ROM1 image area. If within a capacity range, this
is data of a BMP file (bit map file) on a Windows system, that stores up to 2000 types.
A dedicated tool is required to store image data to the flash ROM1 memory. Contact our sales
representative.