60
• Line gap dot space setting
This command sets the line gap dot space. Settings using the ESC sequence (ESC, M/m) in
the print text data string are enabled only in one electronic statement, but settings using this
command function as default settings in the print character data setting command 41h.
STX, 91h, ‘M’/‘m’, line gap dot space setting, ETX, BCC
Line gap dot space setting parameters
‘0’: Sets the line gap dot space setting to 0 dots.
‘1’: Sets the line gap dot space setting to 1 dots.
:
:
‘9’: Sets the line gap dot space setting to 9 dots.
‘A’: Sets the line gap dot space setting to 10 dots.
‘B’: Sets the line gap dot space setting to 11 dots.
‘C’: Sets the line gap dot space setting to 12 dots.
‘D’: Sets the line gap dot space setting to 13 dots.
‘E’: Sets the line gap dot space setting to 14 dots.
‘F’: Sets the line gap dot space setting to 15 dots.
The ex-factory line gap dot space setting is 2 dots.
• LED control method setting
This command sets the method to control the LED.
When setting the LED control method, the LED automatically lights and the buzzer rings when
the device has entered a card insertion wait state or card removal wait state.
STX, 91h, ‘L’/‘l’, operation setting, ETX, BCC
Operation setting parameters
‘0’: LED does not light and buzzer does not ring when there is a card inserting
request or removal request.
‘1’: Buzzer rings when there is a card removal request.
LED displays an insertion request.
‘2’: LED lights to display there is a card removal request.
LED displays an insertion request.
‘3’: LED lights and buzzer rings to display that there is a card removal request.
LED displays an insertion request.
• Setting for the ex-factory defaults
This command returns settings that users can make to their ex-factory, default status. This
does not initialize TPH rank, EHD rank, country model, and manufacturer model.
STX, 91h, ‘Z’/’z’, ‘0’, ETX, BCC
Alphabet Number