CHAPTER 3
PART REPLACEMENT AND RELATED ADJUSTMENT
This chapter presents printer disassembly and reassembly procedures. Please note the following important points.
1. | Always disconnect the power cord from the AC outlet before beginning work. |
|
2. | Except where otherwise indicated, the reassembly procedure is the reverse of the disassembly |
|
| procedure. |
|
|
|
|
3. | Coat screw heads with locking sealant after completing of reassembly. | 3 |
4. | Refer to Chapter 4 Section 2 for information about lubrication. (Chapter 3 does not include any | |
| lubrication information.) |
Note : This printer has no adjustment sites.
1. | Upper Case Unit | 29 |
2. | 29 | |
3. | Printer Mechanism | 30 |
4. | 30 | |
5. | Power Unit | 31 |
6. | Main Logic Board | 32 |
7. | Fuses | 32 |
8. | 33 |
